The canon printer orange light blinking (Call USA/CA: +1-888-272-8868) on your printer is an error indicator. The number of blinks helps identify the specific issue, such as low ink, paper jam, or connection problems. This guide will explain why your Canon printer's orange light is blinking, what each blink code means, and how to fix it step by step.

 

Why is My Canon Printer’s Orange Light Blinking?

The blinking orange light on a Canon printer usually indicates:
✔ Ink Cartridge Issues – Low ink, improper installation, or incompatible cartridges.
✔ Paper Jams or Empty Tray – Stuck paper or no paper loaded.
✔ Connection Problems – WiFi or USB connection failure.
✔ Hardware Malfunctions – Printer head issues or overheating.
✔ Software or Driver Errors – Outdated or missing printer drivers.

Step 1: Count the Number of Orange Light Blinks

Canon printers use blink codes to indicate specific issues. Count the number of times the orange light blinks, then follow the corresponding fix below.

Step 2: Fixing Common Canon Printer Orange Light Errors

Fix 1: Clear Paper Jams (2 Blinks)

1️⃣ Turn off the printer and unplug it.
2️⃣ Open the paper tray and remove any stuck paper.
3️⃣ Check for torn pieces inside and gently remove them.
4️⃣ Reload paper properly and close the tray.
5️⃣ Restart the printer and check if the blinking stops.

✅ If the issue persists, reset the printer and try again.

Fix 2: Check Paper Size Settings (3 Blinks)

1️⃣ Open printer settings on your computer.
2️⃣ Check if the selected paper size matches the loaded paper.
3️⃣ Adjust the paper guides in the input tray.
4️⃣ Restart the printer and try printing again.

✅ If the issue remains, reload the paper and check the tray alignment.

Fix 3: Reinstall Ink Cartridges (4 & 7 Blinks)

1️⃣ Open the printer cover and wait for the cartridges to move to the center.
2️⃣ Remove the ink cartridges carefully.
3️⃣ Reinsert them firmly into their correct slots.
4️⃣ Close the cover and restart the printer.

✅ If the light still blinks, try replacing the ink cartridge.

Fix 4: Reset the Print Head (5 Blinks)

1️⃣ Turn off the printer and unplug it.
2️⃣ Open the printer cover and remove the print head (if removable).
3️⃣ Clean the print head with a soft, lint-free cloth.
4️⃣ Reinstall it carefully and close the cover.
5️⃣ Restart the printer and check if the error is resolved.

✅ If the blinking continues, your print head may need replacement.

Fix 5: Reset the Ink Absorber Counter (8 Blinks)

📌 If the printer’s ink absorber is full, it needs to be reset.

1️⃣ Turn off the printer and press Stop/Reset.
2️⃣ While holding Stop/Reset, press Power and hold for 5 seconds.
3️⃣ Release Power, but keep holding Stop/Reset for 10 seconds.
4️⃣ The printer will enter Service Mode and reset the absorber counter.

✅ If this doesn’t work, contact Canon support for a maintenance kit.

Fix 6: Remove Any Leftover Protective Material (9 Blinks)

1️⃣ Open the printer cover and check for any leftover plastic or protective tape.
2️⃣ Remove all packaging materials inside the printer.
3️⃣ Close the cover and restart the printer.

✅ The printer should now work normally.

Fix 7: Reset Automatic Duplex Printing (11 Blinks)

1️⃣ Turn off the printer and unplug it for 5 minutes.
2️⃣ Restart and try printing again.
3️⃣ If the issue continues, disable automatic duplex printing in printer settings.

✅ Check if the orange light stops blinking.

Fix 8: Resolve Hardware Issues (12+ Blinks)

1️⃣ Unplug the printer and let it cool down if it's overheated.
2️⃣ Ensure the printer is on a flat, stable surface.
3️⃣ Update the printer’s firmware from Canon’s official website.
4️⃣ If none of these steps work, contact Canon customer support.

✅ Serious hardware issues may require professional repair.

Step 3: Reset Your Canon Printer (General Fix)

If none of the above solutions work, try a factory reset on your Canon printer.

How to Reset Canon Printer to Fix Blinking Light:

1️⃣ Turn off the printer.
2️⃣ Press and hold Stop/Reset for 5 seconds.
3️⃣ While holding Stop/Reset, press and hold Power.
4️⃣ Keep holding Power and release Stop/Reset.
5️⃣ Press Stop/Reset five times, then release Power.
6️⃣ The printer will reset and restart.

✅ Check if the orange blinking light is gone.

 

 

Frequently Asked Questions (FAQs)

Q1: Why is my Canon printer orange light blinking continuously?

It indicates an error such as low ink, paper jam, or hardware failure. Count the number of blinks to identify the specific issue and fix it.

Q2: How do I stop my Canon printer from blinking orange?

Follow these steps:
✔️ Check for paper jams and clear them.
✔️ Reinstall or replace ink cartridges.
✔️ Reset the printer to factory settings.

Q3: What if my Canon printer still won’t print after fixing the orange light?

✔️ Restart your computer and printer.
✔️ Update your Canon printer drivers.
✔️ Try reconnecting the printer to WiFi or USB.

Q4: My printer blinks 8 times. What should I do?

8 blinks mean the ink absorber is full. Try resetting it in Service Mode or contact Canon support for maintenance.

Q5: How do I prevent future blinking light errors?

✔️ Use genuine Canon ink cartridges.
✔️ Keep the printer clean and remove dust regularly.
✔️ Avoid overloading the paper tray.

Final Thoughts

A canon blinking orange light on a Canon printer is usually a minor issue that can be fixed by checking ink, paper, and connections. If your printer continues blinking even after troubleshooting, it may need professional repair.